It is equipped with a few pockets and tool holders designed to store and organize your work essentials. I am also amazed at the loop built into the pouch, which you can use to store a flashlight so you can easily peer into dark crevices in the attic or beneath the floor. Another distinctive feature present in this tool pouch from Occidental leather is a chain designed to store your electrical tape.
I am also glad that this tool pouch is lightweight as it means I will not experience problem moving around even with all the stored tools inside of it. This product is solid and durable plus it assures users of a comfortable fit designed to make the process of fulfilling your job even easier. I am also quite sure that the Veto TP4-B Tool Pouch is a tool organizer, which will never cause any disappointment to anyone who is fortunate enough to use it. This tool pouch is designed in a way that you can organize your tools in a secure and vertical manner.
With its vertical organization of your tools, accessing them will be much easier. Since this tool pouch is lightweight and compact, carrying it around even with the tools stored in it will be much more convenient. It comes with a hard bottom, which protects that area, allowing you to carry your stuff without worrying about potentially damaging the bottom of the pouch nor making you feel uncomfortable. It features tool pockets that are deep enough to hold your small and large items.
The large space and room provided by this tool pouch are also impressive. In fact, you get to enjoy twenty interior and exterior vertical pockets of different sizes, ensuring that you will not experience any problem finding the right amount of storage space for your tools. I find this tool pouch sturdy, too, as it is constructed in a way that it can last for quite an extremely long time. It is capable of holding up even on harsh and difficult work environments.
I like the fact that this tool pouch has the ability to evenly distribute the weight of the tools inside so users will not experience too much pressure and discomfort from it. Lastly, there is the Electrician ClipTech Pouch from ToughBuilt, which is known to improve the way electricians and other professional workers carry and bring their tools in the workplace.
It is because while this pouch is sized small, its interiors are roomy and spacious, helping you store and organize a lot of stuff without any problem. One unique feature I would like anyone to take advantage of in this pouch is the ClipTech Hub. It is a unique and patented feature, which makes it possible for you to clip your pouch on and off various types of belt. I like the integrated kickstand in this pouch because I discovered its ability to ensure that it stands upright when on the ground while ensuring that it is close to you so you can easily access what is inside.
The flexibility and adaptability of this pouch from ToughBuilt are also unmatched. I can say that it is versatile because it serves as a compact and convenient storage solution for universal uses and applications. It is heavy-duty and convenient despite its small size plus it has up to thirteen pockets plus tool belt loops. It can also adapt to the requirements of different works, not just electricians, like carpenters, handyman, contractors, plumbers, and framers.
I would also like to highlight how sturdy and durable this tool pouch is. It has a sturdy 6-layer construction paired with its strong and heavy-duty rivet reinforcements. With such solid construction, I find this pouch truly reliable and capable of withstanding even the most challenging work conditions. When you are working on a project, it is best to have your tools where you can reach them. The problem is you cannot bring your toolbox everywhere.
The simplest and best solution for this problem is to use a tool pouch. This refers to a handy container, which can help ensure that you will always have the right tool for the job wherever you are. It can be tiring to constantly walk back and forth between where you are working and your toolbox.
This becomes even more tiring and even dangerous when you need to walk up and down a ladder. This is why you will always see professional contractors wearing tool pouches that contain all of their most used tools. Tool pouches are kind of like a belt bag but made of much tougher materials. They usually come with open pockets for easy access.
In addition, they are often big enough to accommodate large tools like hammers, cordless drills and the like. There are tool pouches that can hold a myriad of tools. Others, on the other hand, are more compact and hold fewer tools but allow for more freedom of movement. Having a tool pouch will mean you can work more efficiently and actually finish your job quicker and with fewer hassles. Tool pouches are pretty straightforward when it comes to their use.
You put in the tools that you usually use and then strap the whole thing around your waist. However, if you are a professional or if you are just really into DIY home repairs, then you will find that there are many other benefits that come with using tool pouches. First of all, tool pouches allow you to carry your tools around with you, just like your trusty toolbox but without the bulkiness.
However, you need to know that tool pouches do not have the same capacities as toolboxes but they really do not need to. Second, tool pouches allow for ease in mobility. Do you usually use all of the tools in your toolbox? Oftentimes, you only use a handful of tools or less for each project you undertake. This is why most tool pouches only have room for the basics — a couple of screwdrivers, a hammer, some pockets for small items and maybe a hanging hook for a hand saw.
There are different kinds of tool pouches for different types of jobs. Here are just four of those that a lot of professionals use:. Suspenders — These tool pouches have straps that attach to the waistband of the tool pouches then go over the shoulders of the user.
This is the best choice in case you need to carry a lot of heavy tools. It is because all that weight will be distributed equally among the hips and the shoulders.
It also works best when you are working at a remote location, like on your roof, and you do not like to needlessly climb up and down ladders. Waist — This is the quintessential tool pouch design. As the name suggests, this tool pouch consists of a wide belt with different-sized pouches for different kinds of tools. It might not have the same capacity as the suspender-type tool belt but it does have enough storage space for most uses.
Hip — If you need more mobility and you do not use that many tools at all, maybe four or six pieces max, you will find the hip-type tool pouch to be just the right size. This is ideal for those who just like to do DIY home repairs, including projects that just require screwdrivers, pliers, and a hammer. The hip tool pouch is so discreet that you might even forget that you are wearing it.
This is also convenient as you just need to drop your dominant hand to your side to get the tools that you need. Apron — Just like the suspenders tool pouch, the apron-type can hold quite a large number of tools. The only difference is that it has the added benefit of protecting your clothes from dirt and grease. It is more suitable for mechanical garages where you have to really get down and dirty inside the engine compartment of vehicles to find and repair the problems.
It is appropriate for woodworkers, welders, and other artisans as its tough canvas material provides a layer of protection against shards, sparks, and other causes of injury. Additional Pouches — If you are not satisfied with the number of storage pouches that your suspender and waist-type tool pouches have, you can buy additional extension pouches to add more storage to the existing ones.
Additionally, you can use these extension pouches on your regular belt to make your own makeshift tool belt. These are some of the most popular types of tool pouches that are available in the market today. Choose the right tool belt that fits your needs. If you do not do labor-intensive projects anyway, then you have no need for a large suspender-type tool pouch or an apron-type.
A hip tool pouch will be more to your liking in such a case. So before you go out shopping for a new tool pouch, take into consideration what kinds of projects you usually do. Tool pouches are invaluable implements for tradespeople for decades, and there are no signs of them ever going out of style. To convince you to get a tool pouch, here are some of the benefits and reasons why you need them:.
Helps organize your tools — The different compartments in tool pouches can keep your tools and materials separated so you can find them easily. Just imagine how much time you can save when you know which pouch you stored your finishing nails instead of rummaging through your trouser pockets containing different items. Improves your work efficiency — There are times when you are so engrossed in your work that even the slightest lag, like walking away from your work area to get tools, will take you off your rhythm.
With a tool pouch, all needed tools and materials are literally within your reach. You will never miss a beat anymore when you are working. With the aid of this item, you can hold your tools and materials securely.
This can help ensure that they will never accidentally fall. Having your tools within your reach also prevents you from having to go up and down ladders whenever you need a particular tool.
To ensure that you will be getting the right pouch, ask yourself the following questions:. What kinds of projects do you usually do? If you will be doing medium-scale projects like replacing the broken tiles on your roof, repairing the fence, or installing new light fixtures in the living room and dining area, then a medium-sized waist tool pouch or a hip tool pouch is ideal for you.
This means you will need the suspender-type or apron-type tool pouch so that your clothes will not get dirty. What tools do you usually use? If you are a typical carpenter then you probably use your hammer, chisels, rasps, screwdrivers, and others. Such large tools need equally large pouches to carry them. Now, if you are into woodworking, and you have to work with lots of sharp tools like chisels, drills, and rasps, then go for a tool pouch made of materials that are tough and rugged enough to prevent the tools from puncturing through.
Something made of thick, tough canvas material would be your best choice. How many tools do you usually use for a single project? Then a large suspender tool pouch will be your best bet. If mobility is not really an issue then you can also get an apron-type tool pouch. On the other hand, if you usually use just two or three tools, like maybe a pair of pliers and screwdrivers, a hip tool pouch is the one that you need. Of course, you can buy whatever tool pouch that you want but would it not be overkill to wear a huge tool belt, only to use three of the tools attached to it?
If you think that you will be using it a lot in the future, like when you are starting your own contractor business, then get a large capacity tool belt. However, if you are set on just doing DIY home repairs, just get the smaller ones. Materials used — Tool pouches are made of different materials — from thin vinyl to robust tanned leather.
Of course, the more durable the material used, the more expensive the end product will be. Construction quality — When shopping for tool pouches, you need to purchase the one that has superior construction.
For instance, you should check the stitching of the seams. Make sure they are double-stitched using heavy-duty thread so that they would not pop out when you place heavy tools in them. As tough as tool pouches are, you still need to take care of them if you want them to last for many years. Caring for your tool pouch may vary depending on the main material used in it. If your tool pouch is primarily made of canvas, then avoid using soapy water when cleaning it.
You should never use any kind of detergent or soap on canvas since this will damage its waterproofing properties and make it weaker.
To remove dirt, you just need to brush it off using a soft-bristled brush, like a used toothbrush. You can also submerge the tool pouch in water and give it a good shaking to dislodge the dirt.
Avoid scrubbing it. To remove stains, dilute some laundry bleach in water and directly apply it on the stained area, allow the bleach to penetrate into the canvas then rinse the whole tool belt in a container containing clean water. Again, do not scrub the canvas. If your tool pouch is made of polyester then machine-wash and dry it. The great thing about polyester is that you can wash it just like any other garment.
Just be extra careful when drying it as it tends to shrink. Just machine-wash it as usual then use medium heat when drying. Use a bit of fabric conditioner at the rinse cycle to prevent the polyester from stiffening. Adding fabric conditioner also prevents the polyester from storing static electricity, which is recommended if you will be working on your car because the static might ignite gas fumes.
There are many different brands of tool pouches in the market nowadays. However, there are only a few that are quite notable for their durability and other features. If you are looking for tool belts that are worth the price, or maybe even more, you should check out trusted brands, like DeWalt, Dickies, McGuire, BucketBoss, and Klein.
All these brands are popular for their well-designed tool pouches. You can also choose from their wide range of colors and designs. What is good about these trusted brands is that their pouches are known to have high storage capacity and for being robust. Everyone who works with hand tools a lot will find tool pouches to be a worthwhile investment. Take the following potential users for instance:. Mechanics — When working on large vehicles like trucks and tractors, mechanics often need to climb onto, and sometimes inside the engine bay.
While being there, they have no access to their toolbox. Even when working on regular-sized cars and trucks, having a tool pouch with all of the tools that they usually use right at their fingertips can help them work faster and more efficiently.
Carpenters — The first ones who actually started using tool belts and pouches were carpenters and for good reason. Oftentimes, carpenters cannot move from their position so that they can get something from their tool chests. For instance, if you are working on the second-floor window from a scaffolding, having tools within your reach will be a whole lot safer than having to go up and down the scaffolding, or carrying a heavy, unsecured tool box up the frame, which is actually quite dangerous.
Electricians — Most electricians need to use different kinds of pliers, screwdrivers, and other tools in their jobs. Most of the time, they work on top of ladders where they could not bring their tool chests with them. Tool belts are handy for their profession because they can bring all of their usual tools without making them encumbered. Anyone who does DIY repairs — If you like to work on small home repairs on your own, having a basic tool pouch is actually somewhat of a requirement.
For instance, if you are working on one of the light fixtures in your house, you do not have to go up and down the ladder when you need to switch from using a screwdriver to a pair of pliers. When your tool belt does not have all of the functionalities that you hoped it would have, it does not mean that you need to buy a new one. Thankfully, there are many detachable tool belt accessories that you can purchase to make yours fit your needs.
Here are some examples of their add-ons:. Holster for cordless drills — Most tool belts only provide a hook for power tools to hang from. However, if you want to provide your tools with more security then get a drill holster. This holster also has compartments for drill bits and an extra battery pack. Additional pouches — Sometimes, the number of compartments on a tool belt is simply not enough.
Thankfully you can easily add more just by strapping on additional pouches. These pouches are great for storing nails of different sizes, screws, nuts and bolts, and other small items that you will need for your project. Loops for suspenders — If your tool belt is starting to feel too heavy for your waist, you do not have to buy a suspender-type tool belt, at least not yet.
You can just get suspender loops for the belt. This way, you can still keep your old tool belt and carry more tools than before.
If you are using a basic tool pouch, you need to tighten the strap just enough that it will not go sliding down your legs. Make sure, however, that it is not too tight that it makes it hard to breathe properly. It should fit you comfortably and should not impede your movement in any way. When placing tools into the pouches, you do not do it randomly. You have to organize them. For instance, you need to place the tools that you usually use near your dominant hand, like your hammer, screwdrivers, utility knife, and others.
On the side of your non-dominant hand, you can place the tools that you only use occasionally, like your roll of electrical tape, duct tape, measuring tape, marking pencil, and the like. Tool pouches are made using different materials, so there is no one way to clean them properly. It is advisable to consult the tags attached on your tool pouch for proper cleaning instructions.
Usually, you just have to brush off any caked-on dirt and grime from the surface of your tool pouch using a soft-bristled brush. For tougher cases, some of them can be left to soak in water overnight then left to air dry. You can find tool belts and pouches in your local hardware store.
However, if the hardware store in your town is not that large, the number of choices that you will have will be quite limited to just a handful of brands.
The best places to shop for tool pouches, as far as the number of choices goes, are in online sites like Amazon and eBay. There, you can find almost all of the brands that make tool belts, as well as the accessories that you can use to add more functionality to them. This is thanks to it being made entirely of ripstop nylon fabric. This construction material is so tough that you need to consciously make an effort to punch a hole through the stuff. The belt is around three inches wide, which is perfect for distributing the weight of the belt and its contents.
It is also nice that the fabric material is breathable. As the name suggests, a framing tool belt refers to a tool belt used by framers who refer to carpenters specializing in making the framing structures of houses. Most of the time, they are working on making trusses for the roof of the house, so they will need a tool belt that can let them carry their equipment conveniently and safely. There is nothing that different between tool belts used by framers and those used by general contractors.
The only real difference is that the ones used by framers have compartments for the tools that they usually use near their dominant hand. This promotes further ease when working especially when you are standing more than ten feet off the ground. Tool belts are typically three-inch wide belts. You will notice that they are made by either leather or nylon canvas. These items also often come with pouches on either side. These pouches are separated into different compartments for the different tools and materials that the framers need to carry along with them.
Tool belts make it easier for the user to grab the tools that he needs. It is mainly because they are organized and arranged according to how commonly they are used in framing projects. For instance, the measuring tape and speed square are usually placed in a pouch on the left side and the pencils and other marking tools are on the right. Make sure to pick one that you will use depending on your style of working.
Some choices in terms of the different types of framing tool belts are:. This type is the most popular. I also discovered that it is the easiest to source and is famous for its compatibility with most tasks. This means you will find this tool belt useful in whatever task you have in mind.
The problem with this type of tool belt is that you can only carry a certain amount of tools before you start to feel discomfort around your waist area, especially if you need to wear the belt for hours on end. This type of tool belt can also be further divided into a single piece worn, or belt and extendable pouches.
Suspenders — I can say that these are the ideal choices when you will be carrying a lot of tools with you. In the case of framers, this is every time they go to work. The suspenders take all of the weight of the tools and other materials off the waist and place them squarely along the shoulders of the wearer. This can help in preventing lower back pain in the future. A high-quality framing tool belt is one of the most important items in the life of a tradesman.
With a good framing tool belt around, you are assured of the safe storage of all your essential tools. Some of the most viable reasons why you need it are:. Promotes ease in organizing your tools — You need this type of tool belt so you can decently store and organize your work tools.
With your organized tools, finding something you need to perform a particular task will be quick and easy. It also ensures that your tools will always be within easy reach. Aside from that, you have an assurance that you carry all the things you need for your job smartly. This will guarantee you of a hassle-free experience when working. Furthermore, you will have a smooth-sailing experience when storing your tools and reaching them whenever you need them.
Promotes productivity — This is possible because the tool belt will ensure that you can easily access your tools. With that, you can also maintain your focus. Allows you to move smoothly — Note that your job may require you to move a lot. If that is the case then you need a well-equipped tool belt attached to your waist and loaded with everything necessary to do your work.
With that around, you can freely and smoothly move around. It is because the item will help free your hands to do more important stuff than carrying tools. It is because the suspenders and the tool belt itself can help distribute the weight of your tools evenly. This can lessen the strain you might experience, thereby preventing pain in your hips and lower back. This is beneficial if you want to keep yourself safe and ensure that your health will not be compromised when doing your job.
Apart from the mentioned reasons, wearing a framing tool belt also offers the advantage of lessening your risk in the workplace. This is especially true if your job requires you to deal with ladders, walls, roofs, and other dangerous parts and places.
With the ability of the tool belt to keep your hands free, it would be easy for you to move quickly. This can also lessen the risks and dangers associated with your movements. To have an easier time shopping for a framing tool belt, I have compiled some of the factors, features, and qualities you have to watch out for. The following are just a few of them:. The type of job you have — The first thing to consider is the specific job you have as this will give you an idea of what kind of tool belt will specifically work for you.
This will also let you know the specific tools you will store there. For general uses, you may be able to use a universal tool belt. However, if you are planning to use the tool belt for professional purposes then make sure to pick one with the specific features you need. It should also be capable of carrying all the tools you need for your job. Capacity — Keep in mind that the primary reason for investing in a tool belt is to carry your tools.
This is why you have to assess its carrying capacity. Go for a belt with the specific number and size of pockets, tool holders, and pouches you need. Material — Make your choice after considering the specific material used in creating the product.
In most cases, a framing tool belt is constructed from materials, like canvas, nylon, polyester, and leather. You can also find tool belts integrated with hard metal roller buckle, holders, loop, and stainless steel. Make sure that the material used in creating the tool belt as well as their additional features play a major role in strengthening it.
It should be rust-free so you can use it for a long time. Furthermore, all its parts should be comfortable enough to use so you can withstand wearing and using it for the entire workday. Finishing — Another thing you have to consider is the finishing of the tool belt. Make sure to pick a well-finished one. Aside from the finishing of the main material, check the one used in its attached tool holders and metals, too.
The other parts should be properly finished, too, including the pouches, pockets, and stitching. The finishing needs to be of great quality as this assures you of a smooth, hassle-free, and easy access and use of your tools aside from being nice to look at. Shape — Note that tool belts are available in various shapes.
It is advisable to consider the specific shape of the tool belt you are planning to buy because this influences the internal space and the final look. You can find those that are slim while others are bulky and heavy in appearance. When determining the specific shape you need for your job, it is helpful to assess how the featured pouches and pockets of the tool belt were shaped. You can also make a decision in this area based on the specific tool space you need.
Waist size — While the waist size of most tool belts are flexible enough that it fits most waist sizes, it is still crucial to get an accurate size, one that accurately and smoothly fits your specific waistline. Fortunately, just like pants, tool belts are available in various sizes, particularly small, medium, large, extra-large, and XXL. With that, buying based on your actual waist size is possible. Weight — Consider the weight of the tool belt, too.
An empty tool belt usually weighs around 3 to 7 lbs. Make sure to consider the actual weight of the one you intend to buy. The weight is important as it has a say on how easily and comfortably you will be able to use the item.
You may notice that heavily configured ones are heavier than the others but find out if you can tolerate such weight while still boosting your work performance. For your framing tool belt to last for as long as you want, it is crucial to provide it with the necessary care. One way to preserve its excellent condition is to use it correctly. An important guideline when it comes to using your tool belt is to clean it regularly.
Cleaning it is simple as you just need to use a soft brush or soft cloth to wipe it down. In case it gets wet, make sure to let it get dry right away. In terms of storage, note that it is essential to look for a dry and cool storage area for it.
Spend time monitoring the status of all the tools you store in there, too. Make sure to spend time checking it for damage before and after each use. If the tool belt is constructed from leather material then give it extra care and attention.
Watch out for cracks and dryness so you can treat it right away. Also, avoid filling the tool belt beyond its capacity and exposing it to chemicals, fire, and water. Several brands of framing tool belt emerge in the market, promising to offer the best in terms of quality and performance to potential buyers. The best tool pouch for framing is that which can truly give you real value for the amount you spent by providing you with all the things you expect from it.
You have an assurance that you are getting the best one if it comes with a great capacity while remaining lightweight. It is also important for it to be durable with well-reinforced and strong stitching. Furthermore, it should be reasonably priced and should give users the utmost comfort with features as simple as carrying handles. Setting up and using or wearing a framing tool belt should be done correctly so you can maximize it.
To use it properly, there are three important things to remember — the orientation, pouch count, and weight. The way you deal with the mentioned factors can greatly influence how smoothly you will be able to use the framing tool belt. The way you wear your tool belt serves as the orientation. It would be helpful to wear it backward for specific jobs. Such an orientation is ideal for tasks, like framing, as these tasks often require you to bend a lot.
This also ensures that even if there are pouches behind, they will not dig in while you are bending. It also ensures that your rear will carry the weight.
One thing to remember once you decide to wear the framing tool belt backward is to swap pouches. This is important to ensure that your dominant hand will have an easier time reaching the dominant pouch.
The pouch count also matters in setting up and using a framing tool belt. It would be best for the belt to just have around two large pouches. Also, remember that the higher the pouch count is, the more challenging it will be for you to do your job. Furthermore, you need to set up your belt in a way that you can easily remove any additional hauler pouch once you arrive at your destination.
Since the weight also has a say on how easily you will be able to use and wear the framing tool belt, it is advisable to pick a lightweight one. It also helps to invest in suspenders where you can hang your belt. Suspenders can help remove weight from your lower back and hips. They can also distribute some weight to the shoulders.
You may want to attach the suspenders to your tool belt and further lessen the load by putting on a tool vest. The majority of framing tool belt manufacturers provide a limited warranty for their products. This is the usual warranty offered in the industry but the actual policy will still be dependent on your choice of company or manufacturer.
There are times when sellers also provide replacement offers. It would be best for you to spend time checking the warranty policy of your chosen company so you have an idea what to expect in case problems arise.
While you can buy a framing tool belt from various sources, it would be best for you to choose reliable marketplaces, like Amazon com, Walmart, Lowes, and Home Depot. If possible, buy this item online as this will let you gain access to a wide array of choices. Just make sure to spend time comparing your choices to pick the correct one.
With the aid of the best framing tool belt, you can get rid of all the hassles linked to keeping up with the tools you need to complete your job.
Fortunately, it is not that hard to select a truly good framing tool belt due to the numerous favorable deals currently in the market. You just have to make sure that you are fully aware of the different options you have as well as the specific qualities and features that make up a good one. With that knowledge, you have a higher chance of selecting a high-quality framing tool belt, which can exceed your expectations.
Bucket Boss 2 Bag Tool Belt 3. OX Tools 4-piece Construction Rig 4. Dickies Work Gear Tool Belt 6. Occidental Leather Pro Fastener Bag 7. Carhartt Legacy Custom Tool Belt 9. Leather Gold Heavy-duty Tool Pouch However, seeing as almost the entire thing is made of genuine top leather, you can be sure that it will weigh quite a lot, especially when you compare it to ones that are made of nylon.
Because of the weight, you might also need to buy hip pads to prevent the tool belt from rubbing your hips raw. What We Like. Quite on the heavy side. Regardless of the weight, I still find this tool belt a great choice if you are looking for one that can last for many years. The thing that I did not like much about this belt is that there are no interior dividers in the pockets for the smaller things that I have to bring with me. Can fit hefty people Made of durable yet lightweight materials Can add or reposition pouches as necessary Constructed in a very durable fashion The built-in pouches are large enough and can carry a lot of things.
Does not come with removable interior dividers. For its price range and all of the benefits that come with using this high-quality choice for a framing tool belt, preferring to buy this over the others can surely benefit you. However, I am not so fond of the fact that there is no way to keep the pouches in place. Whenever I have to wear the belt, I have to slide the pouches back to their proper place.
Made of durable and beautiful oil-tanned leather Equipped with a lot of pouches and pockets Boasts of a 3-inch width for maximum comfort Comes with 22 different pockets Constructed with durability in mind. The pouches cannot be fixed in place. Having to reposition the pouches is not that big of a deal, though. It does not even take anything away from all the different benefits that this famous tool belt also provides.
The only thing that I did not like is that not all people use their tool belt the same way. The pouches do not slide out of place. Are made of very durable yet lightweight materials The pouches for the most used tools are in the right places. Has a version for left-handed people Comes with pouches that have wide openings. It is hard to reconfigure the pouches. Although there are some issues with the pouch placement, I still noticed that this specific tool belt offers a lot more advantages than downsides, which is why it is worth investing in.
The only complaint I have is that there is no space for a speed square. I think having such a feature would have made this tool belt perfect for framing. The suspenders are a bit too big for most people.
There are many ways to make the suspenders and the belt fit right and this is very important because these are great framing tools belt that can last for many years. There is not much to complain about with this Occidental Leather tool belt. The only thing that I can think of is that the leather knife guard tends to come off at the sheath.
Apart from that, I can no longer find anything to fault this product. Can provide ten additional pockets to a tool belt Has a pocket designed specifically for a speed square Very tough and well-reinforced construction Made of top cowhide material Easy to attach to a tool belt.
0コメント