Install siphon break washer

Thread the end of the washer drain hose through one of the rings on the end of a U-shaped hose form. Lay the drain hose in the open channel of the form.

Thread the end of the hose through the ring on the opposite end of the hose form. Insert the end of the hose and the hose form into the stand pipe or wall drain pipe.

Loosely attach the drain hose to the stand pipe or washer supply hoses with a cable tie to keep the hose from slipping from the pipe or wall. Grasp the drain hose and pull it from behind the washer.

Insert one end of the washer drain hose through one of the rings at the end of a U-shaped hose form. Lay the drain hose in the open channel of the form so that the hose creates a U-shape. Thread the end of the drain hose through the ring on the opposite end of the hose form. Just installed it as you suggested and it works like a champ! Search for plumbing parts on our sponsor's site:.

Special thanks to our sponsor:. Over , strictly plumbing related posts. How to Show Images. Pat Post Reply. Post Reply. Please note: Inappropriate messages or blatant advertising will be deleted. Insert the remaining drain hose onto the other end of the siphon break. Do not install the hose onto the end of the siphon break that has the air bleed vent inside.

The air bleed vent looks like a rubber bladder with small holes cut in it. Tighten the hose clamps with a screwdriver to secure the drain hose and the siphon break. Make sure you have all the parts for the siphon break kit. If further help is needed, please reply. Thank you for using Manage My Life. Want to get updates on new answers? Answer this question.

August 22nd , My washer will not fill. When attempting to fill, all of the water goes back out through the drain hose. Tags Kenmore , Washers Click to remove this tagging. The image below shows the installation instructions for a siphon break kit part number You may also need a drain hose extension part number